These mini- stick stereo microphones (MM-MS-1) are hand made with High-Quality products to ensure long life and excellent recordings! Comes with a "Life-time warranty at no extra charge! These omni- directional microphone elements are smaller than a eraser head of a pencil. Each element is mounted into there own durable brass cylinder ( approx. 1/4" in diameter x 2" long). Six feet of high-quality shielded microphone cable exits the bottom of each cylinder and is terminated into a gold plated 1/8" (3.5mm) stereo plug. These microphones can be easily plugged int any minidisc, dat, or analog recorder that supplies a bias voltage of between 1.5 to 10 volts D.C. (also known as plug in power) at the microphone input jack.

These microphones have a very naturally crisp sound, providing deep bass, smooth mid-range and clean high range with a frequency response of typically +/- 2 dB.

Note: If your recorder does not provide a bias voltage or if you want to feed your recorders line inputs to avoid overloading your recorder's mic pre-amplifier, you can use one of our Battery Modules ( check out our Battery-Module Section).

Battery Modules will power the microphones with optimum power ( 9 volts D.C ), increase dynamic range and enable the mics to handle higher (SPL) sound pressure levels ( loud sounds )without distortion.

Specifications

• Frequency response: 20- 20,000 Hz
• Signal to noise ratio: 58dB, 1khz at 1pa
• Open circuit sensitivity : -42dB (5.6 mv) re 1v at 1pa
• Dynamic range: 90dB, 1kHz
• Maximum Input Sound Level: 105dB SPL (120 db when used with one of our battery modules), 1kHz at 1%

Features

• Flat frequency response
• Comes premium windscreens
• Requires a bias voltage of 1.5 to 10 volts D.C. (also known as plug-in- power) or one of our battery modules.
• Includes Life- Time Warranty at no extra charge!

Accessories

• Check out our Battery / Filter Module Section (mono) or (stereo)
• Optional universal holding clips