MM-MBM Miniature "Mint Box" Battery / Filter Module
with 7 position bass roll off!

Model:

MM-MBM

Availability:

Usually ships the next business day

Regular price:

US$ 99.00

Sale price:

US$ 79.00

The Miniature Mint Box Battery/Filter Module (MM-MBM) is a self- contained power/filter unit capable of providing a microphone(s) with optimum power for increased dynamic range and superior overall performance. This battery module provides control of seven bass frequencies with independent switches for each channel. These bass roll-off filters allow you to filter various degrees of bass content from the sound to be recorded: From no bass reduction at all, to a high degree of bass reduction. This unit is hand made with top quality components to ensure long life and excellent recordings!

Customized for greater convenience, the 7-position bass roll-off feature is easily accessible by simply lifting the lid on the box. Because they're inside the box, you don't have to worry about accidentally making any unwanted changes while the unit is sitting in your pocket or bag.

Many MDs, DATs and Camcorders available on the market today provide a small power source from the microphone input (also known as plug-in power). This is enough voltage to power the microphone(s), but not enough to let them realize their full dynamic range. This battery module provides an optimum 9 volts D.C., which will enable your microphone(s) to handle much higher (SPL) sound pressure levels without distortion!

Most built in pre-amps on portable MD recorders are rather noisy and won't give you the real crisp sound you want for your recordings. The line input has less noise than most microphone inputs, since it bypasses the mic pre-amp stage. The line input is capable of handling a much higher signal level than the mic inputs, and will not result in “brick- walling”, which will happen when the signal fed into a mic input is so high that it causes distortion regardless of the level settings.

Our Battery module can be used in conjunction with either your "mic or line" inputs. For soft to moderately loud recordings use your mic input! For moderate to very loud sounds use your line input! The module utilizes 3 3-volt lithium wafer batteries cascaded together (included) which will last approximately 300 hours.

Constructed of sturdy metal with hinged lid, measures 2 3/8" x 1 5/8" x 3/4" !!!

NOTE: Battery modules will not increase the output of the microphone(s) plugged into it . That is the job of a microphone preamplifier!!!!

  • Modified tin mint box enclosure with hinged lid.
  • Utilizes three standard 3-volt lithium wafer batteries (included). Battery size CR-2016
  • 2' output cable w/ 90-degree molded 1/8” stereo miniplug connector.

  • 7-Position Bass Roll-Off for Customized Sound.
  • Bass Controls are Easily Accessible by Lifting Box Lid.
  • Works with any mic or line level input!