http://www.microphonemadness.com/
Home MicrophonesMini Stereo Omni MicrophonesMM-BSM-3 Standard Binaural Stereo Microphones
MM-BSM-3 Standard Binaural Stereo Microphones
Click Image to Enlarge  Click Image to Enlarge

MM-BSM-3 Standard Binaural Stereo Microphones

Model No. :
MM-BSM-3
Availability :
OUT OF STOCK
Regular Price :
$59.95
Sale Price :
$55.95
Out-of Stock
Product Description

Our (MM-BSM-3) is hand-made with high quality products to ensure long life and excellent recordings! These omni- directional microphones are smaller than an eraser head of a pencil. Miniature in size each microphone element is mounted into there own durable brass capsules ( approx. 1/4" in diameter x 1/2" long). Six feet of high quality shielded microphone cable exits the side of each capsule and are terminated into a gold plated 1/8" ( 3.5 mm) stereo plug.

These microphones have a very naturally crisp sound, providing deep bass, smooth mid-range and clean high-range with a frequency response of typically +/-2dB. They can be easily plugged into any Minidisc, Dat or analog recorder that supplies a bias voltage of between 1.5 to 10 volts D.C. (also known as plug in power) at the microphone input jack.

Excellent for the following recorders but not limited to: Edirol R9, Kodak Zi8 HD pocket video camera, Olympus DS-40, Olympus LS-10, Tascam DR-01, Tascam DR-03, Tascam DR-07, Yamaha CX, Zoom H1, Zoom H2 and Zoom H4N.

Note: If your recorder does not provide a bias voltage or if you want to feed your recorders line inputs to avoid overloading your recorder's mic pre-amplifier, you can use one of our Battery Modules (check out our Battery-Module Section).

Battery Modules will power the microphones with optimum power ( 9 volts D.C ), increase dynamic range and enable the mics to handle higher (SPL) sound pressure levels ( loud sounds ) without distortion.

Specifications

  • Frequency response: 20- 20,000 Hz
  • Signal to noise ratio: 58dB, 1khz at 1pa
  • Open circuit sensitivity : -42dB (5.6 mv) re 1v at 1pa
  • Dynamic range: 90dB, 1kHz
  • Maximum Input Sound Level: 105dB SPL (120 db when used with one of our battery modules), 1kHz at 1%

Features

  • Flat frequency response
  • Comes with premium windscreens.
  • Requires a bias voltage of 1.5 to 10 volts D.C. (also known as plug-in- power) or one of our battery modules.
  • 1 Year Warranty

Accessories

Cross Sell Products
Product Reviews
No Reviews for this product added yet. Be first and submit your review below.